JINK Switch X1
JINK Switch X1
JINK Switch X1 at a glance
JINK Switch X1 in the selected configuration, mounting hardware and product instructions.
- Dimensions: 85.8 × 86 × 37.55 mm
JINK Switch X1
A wired wall switch designed for Matter over Thread smart-home control. Switch X1 combines immediate physical operation with room, scene and automation control through the compatible Matter ecosystem selected for the installation.
Before You Order
- Matter controller required: use a compatible Matter controller in the ecosystem you plan to use.
- Thread Border Router required: Matter over Thread cannot be commissioned without compatible Thread infrastructure.
- Professional installation: confirm the wall box, wiring, circuit, load type and local electrical requirements before purchase.
- Functions vary by ecosystem: available controls, automations, remote access and voice features depend on the platform, controller, firmware and region.
Key Features
- Matter over Thread connectivity for supported smart-home ecosystems.
- Physical keys for direct local operation.
- 86 mm architectural format with multiple surface finishes and key configurations.
- No proprietary JINK hub is required for Matter commissioning; a compatible Matter controller and Thread Border Router are still required.
- Designed for residential and professional smart-home installations.
Choose the Correct Configuration
The option selector combines the faceplate finish and the number of physical keys. Confirm the selected configuration against the project wiring and control plan before ordering.
Technical Specifications
| Wireless protocol | Matter over Thread |
| Model family | Z75-01 / Z75-02 / Z75-03 / Z75-04 |
| Input | 100–275 V AC, 50/60 Hz |
| Maximum load | 16 A / 2000 W max. Final allowable load depends on load type, wiring and local electrical requirements. |
| Dimensions | 85.8 × 86 × 37.55 mm |
| System requirement | Compatible Matter controller and Thread Border Router |
| Installation | Qualified electrician or smart-home professional recommended |
Setup
- Complete all mains wiring with power isolated.
- Restore power and follow the model-specific reset or pairing instructions.
- Add the switch from the compatible ecosystem app using its Matter setup code.
- Assign the device to a room and verify every physical key and connected load.
What’s in the Box
JINK Switch X1 in the selected configuration, mounting hardware and product instructions.
Product appearance can vary by selected finish. Confirm key count, finish, wiring, load and ecosystem requirements before ordering.
JINK Switch X1 — Frequently Asked Questions
What is JINK Switch X1?
JINK Switch X1 in the selected configuration, mounting hardware and product instructions.
What dimensions or fitting size should I plan for?
- Dimensions: 85.8 × 86 × 37.55 mm
Match the selected model to the installation drawing and available clearance before ordering.
What electrical ratings should my installer check?
- Input: 100–275 V AC, 50/60 Hz
- Maximum load: 16 A / 2000 W max. Final allowable load depends on load type, wiring and local electrical requirements.
The listed values do not replace the selected model’s wiring diagram. Confirm the supply, connected load and installation requirements before energizing the product.
What do I need for Matter over Thread setup?
This model is listed as Matter over Thread. You need a compatible Matter controller and Thread border router; one device may provide both roles. Check the selected ecosystem and firmware before purchase. A Wi-Fi router alone is not a substitute for Thread infrastructure.
Can I replace my existing wall control without checking the wiring?
No. Confirm the wall-box format and depth, supply voltage, neutral-wire requirement, load type and channel arrangement for the exact version. Mains wiring must be assessed and installed by a qualified professional.
Does a current rating guarantee compatibility with any appliance or dimmable light?
No. Check the permitted load type, inrush current, per-channel and total limits, and the manufacturer’s wiring diagram. A switching-current rating does not establish dimmer, fan-speed or motor-control capability.
Which options can I select for JINK Switch X1?
- Finish and Keys: Water Ripple Gray · 2-Key · Water Ripple Gray · 4-Key · Water Ripple White · 2-Key · Water Ripple White · 4-Key · Silver · 2-Key · Silver · 4-Key · AG Glass Gray · 2-Key · AG Glass Gray · 4-Key · AG Glass White · 2-Key · AG Glass White · 4-Key
Use the product selector to confirm the available combination. Separate option lists do not mean every combination is offered.
How should JINK Switch X1 be installed?
- Installation: Qualified electrician or smart-home professional recommended
Confirm the final mounting position, fixing method and clearance. Have mains wiring and any structural work carried out by a qualified professional.
What is included with JINK Switch X1?
JINK Switch X1 in the selected configuration, mounting hardware and product instructions.
Product appearance can vary by selected finish. Confirm key count, finish, wiring, load and ecosystem requirements before ordering.
Confirm the package for the selected configuration; separately specified accessories are not automatically included.
What information should I send for product selection or a project quote?
Include JINK Switch X1, the selected configuration, quantity, destination country and installation details. Add the existing equipment model and target control platform where relevant. Request confirmation of compatibility, included components and delivery timing before committing to the project.