JINK Dot Pro — Smart Downlight
JINK Dot Pro — Smart Downlight
JINK Dot Pro at a glance
1 × JINK Dot Pro in the selected reflector, beam-angle and cutout configuration, plus product instructions and the supplied installation components.
- Color temperature: 2700–6500 K, tunable white
JINK Dot Pro
An adjustable architectural downlight with Matter over Thread control, tunable white light and a modular optical system. Dot Pro is intended for residential, hospitality and project lighting where the cutout, reflector style and beam angle must be selected precisely.
Before You Order
- Matter controller required: use a compatible Matter controller in the ecosystem selected for the project.
- Thread Border Router required: Matter over Thread requires compatible Thread infrastructure.
- Select all three options: reflector style, beam angle and ceiling cutout.
- Professional installation: confirm the ceiling opening, available installation depth, driver, wiring and local electrical requirements.
Optical Configurations
Dot Pro is available in four reflector styles—Standard, Curve, Pin and Soft—with beam angles of 5°, 8°, 15°, 24°, 36° or 55°. Select either a 55 mm or 75 mm ceiling cutout. The resulting 48 combinations are identified by unique SKUs.
Lighting Performance
- Tunable white: 2700–6500 K.
- High color rendering: CRI 98+.
- Deep anti-glare optical structure: UGR < 16.
- Adjustable aiming: up to 30° on the applicable body configuration.
- Multiple narrow-to-wide beam options for accent, task and general lighting.
- Rated life: 50,000+ hours under the stated operating conditions.
Matter and Apple Home
Add Dot Pro through the compatible Matter ecosystem using the product’s Matter setup code. Apple Home control requires a compatible Apple home hub and Thread Border Router. Available dimming, tunable-white, scene, automation, voice and remote-access functions can vary by ecosystem, controller, firmware and region.
Technical Specifications
| Product type | Adjustable recessed smart downlight |
| Wireless protocol | Matter over Thread |
| Color temperature | 2700–6500 K, tunable white |
| Color rendering | CRI 98+ |
| Glare control | UGR < 16 |
| Beam angles | 5° / 8° / 15° / 24° / 36° / 55° |
| Ceiling cutout | 55 mm or 75 mm, depending on selected variant |
| Aiming | Up to 30° on applicable configurations |
| System requirement | Compatible Matter controller and Thread Border Router |
Installation
Installation must be completed by a qualified electrician. Isolate power, verify the selected cutout and installation depth, follow the supplied wiring instructions, and test dimming and tunable-white control after Matter commissioning.
What’s in the Box
1 × JINK Dot Pro in the selected reflector, beam-angle and cutout configuration, plus product instructions and the supplied installation components.
Confirm the final photometric, driver and installation specification for project use. Product functions depend on the selected ecosystem and controller.
JINK Dot Pro — Frequently Asked Questions
What is JINK Dot Pro?
1 × JINK Dot Pro in the selected reflector, beam-angle and cutout configuration, plus product instructions and the supplied installation components.
What light output, color temperature and beam options are specified?
- Color temperature: 2700–6500 K, tunable white
- Color rendering: CRI 98+
- Beam angles: 5° / 8° / 15° / 24° / 36° / 55°
- High color rendering: CRI 98+.
Use the specification for the selected model. A tunable-white specification alone does not confirm RGB color effects.
What dimensions or fitting size should I plan for?
- Ceiling cutout: 55 mm or 75 mm, depending on selected variant
Match the selected model to the installation drawing and available clearance before ordering.
What do I need for Matter over Thread setup?
This model is listed as Matter over Thread. You need a compatible Matter controller and Thread border router; one device may provide both roles. Check the selected ecosystem and firmware before purchase. A Wi-Fi router alone is not a substitute for Thread infrastructure.
Which options can I select for JINK Dot Pro?
- Reflector Style: Standard · Curve · Pin · Soft
- Beam Angle: 5° · 8° · 15° · 24° · 36° · 55°
- Ceiling Cutout: 75 mm · 55 mm
Use the product selector to confirm the available combination. Separate option lists do not mean every combination is offered.
How should JINK Dot Pro be installed?
Installation must be completed by a qualified electrician. Isolate power, verify the selected cutout and installation depth, follow the supplied wiring instructions, and test dimming and tunable-white control after Matter commissioning.
Confirm the final mounting position, fixing method and clearance. Have mains wiring and any structural work carried out by a qualified professional.
Can I use it outdoors or in a wet area?
Outdoor or wet-area suitability is not established by the product name. Confirm a model-specific ingress-protection rating and approved installation conditions before selecting it for those locations.
What is included with JINK Dot Pro?
1 × JINK Dot Pro in the selected reflector, beam-angle and cutout configuration, plus product instructions and the supplied installation components.
Confirm the final photometric, driver and installation specification for project use. Product functions depend on the selected ecosystem and controller.
Confirm the package for the selected configuration; separately specified accessories are not automatically included.
What information should I send for product selection or a project quote?
Include JINK Dot Pro, the selected configuration, quantity, destination country and installation details. Add the existing equipment model and target control platform where relevant. Request confirmation of compatibility, included components and delivery timing before committing to the project.